Insulated Component Structures of Florida, Inc.

The ICS Solution to the four major building needs.

The picture below and to the right illustrate the ICS FIBEROCK (S.I.P.) polyurethane panel. In addition to the attributes of energy savings - 0 Flame Spread - Moisture& Mildew Barrier, we have incorporated 18 GA. Metal Framing which when tested exceeded CAT 4 Hurricane forces.

Additionally, we can provide you with either or both internal and external surfaces of Wood, Fiber Cement, Fiber Reinforced Plastic (FRP) or metal all of which have a polyurethane core. The variety of surfaces allows ICS-SIPs to have numerous applications: educational buildings, commercial buildings, paint booths, storage buildings, retail, modular offices, laboratories, temperature/humidity controlled enclosures, curing barns, agricultural and animal containment buildings, family residences, assisted living and nursing homes, protective electronic shelters, are a few of the place where the ICS panels are being used.

The insulation value of ICS-Structural Panels ranges from R-20 (3") to R-42 (6 1/2"). This can provide a reduction in energy consumption from 30% to 70%, depending on local heating and cooling requirements and local utilities costs, when compared to present construction methods.

Oriented Strand Board (OSB)

Oriented Strand Board (OSB) is a panel made with layers

of precision-manufactured wood "strands" that are aligned,

formed into panels and pressed with an exterior grade

adhesive resin. The resulting engineered product is a

high-quality, cost-effective panel for structural building

components that delivers exceptional performance

providing uniformity, strength and versatility. OSB is fully

engineered for strength and durability. That means each

panel is specifically designed and tested to meet or exceed

stringent quality standards. OSB has proven to be an economical and competitive structural panel made from a completely renewable resource -- small-diameter, fast-growing trees. Since its debut in the marketplace in 1978, OSB has been rapidly accepted. In many areas of North America, OSB has virtually replaced other panels in residential construction. Today, all model building codes in the U.S. and Canada recognize OSB panels for the same uses as plywood on a thickness-by-thickness basis. OSB, as a performance-based structural use panel, is recognized by all the major U.S. model code agencies through the adoption of DOC PS2-92 Wood-Based Structural Use Panels. OSB, certified to CSA 0325 and CSA 0437, is accepted in the National Building Code of Canada. OSB certified to EN 300 is recognized for structural use in Europe. In Japan, North American OSB is certified to meet the JAS standard for structural panels.

The information and materials on this website are provided for advertising and informational purposes. While every effort has been made to provide accurate and current information, Insulated Component Structures of FL., Inc. reserves the exclusive right to make changes both physical and structural to the products built at any time without notice. Insulated Component Structures of FL., Inc. does not warrant that the information and materials are free from error.

Insulated Component Structures of FL., Inc. assumes no liability for the installation of the panels. The panel installation and safety procedures shall be at the direction of the building contractor, project engineer or architect. The panels should be handled with extreme care due to their size and weight. Improper handling, storage or erection can result in serious personal injury or death.

2225 C. R. 44 West, Eustis, FL 32726
352-483-7477, 352-589-8477 Fax, Email

Design & Hosting By