|
| Definition:
A self-contained mobile cleansing unit capable of providing hot
water and electricity in emergency situations where permanent facilities
are not available. The wastewater generated is captured in a holding
tank for proper permanent disposal.
General
All pre-fabricated
wall and roof panels, including all splines and fasteners, shall
provide a complete exterior/interior insulated structural package.
Homeland
Security Mobile Units |
|
|
Performance
Features Trailer
 |
|
| Dual
axle trailer, Load Capacity: 7000 lbs |
| Trailer
Hitch: |
|
Standard 2 5/16"
industrial |
| Wheel
Rims: |
|
15" white/chrome
painted |
| Tires: |
|
All season 225/70P15 |
| Overall
Dimension: |
|
15'(L) x 8'(W)
x 9'(H) |
| Two
clearance lamps, Two side marker lamps. |
| Two
reflectors and stoplights |
Click Image
for Larger View |
Containment
Area
| Size: |
|
77 x 100 |
| Lights:
|
|
Four Halogen 300 watt;
One located on top of each corner. |
| Walls: |
|
3" thick secured to
the metal frame using 1 ½" grade 5, bolts and 5/16" T-nuts |
| Wall
core: |
|
2.4 lbs/ft3 Polyurethane
foam panels with R-21 insulation value |
| Roof: |
|
Arched and sealed to
allow runoff; |
| Roof
Core: |
|
2.4lbs/ft3 Polyurethane
foam panels with R-21 insulation value. |
| Roof
Vent: |
|
Operable translucent
vent with screen and manual crank. |
| Surfaces: |
|
G90 24 Gauge Galvanized |
| Steel
Stone Guard: |
|
100 bright aluminum
diamond plat on front of unit |
| Door:
|
|
Decontamination room
door to be double wall galvanized insulated with a polyurethane
core. Aluminum extruded frame securing door in panel and door edge
frame to panel. Three latches securing top, middle, and bottom.
Middle latch to contain lock. Stainless steel hinges |
| Window: |
|
11" x 11" clear, places
@ 54" up from the bottom of the door. Chemical
resistant extruded gasket press fitted into the frame |
| Decontamination
area: |
|
Insulate with four water
outlet locations in the inside wall surface. Two
handheld drench hoses, shower heads and holders. |
| Holding
Tank: |
|
Thirty gallon polyurethane
containment holding tank |
| Floor: |
|
Sloped to allow wash
down liquid to flow toward the centrally located drain. Drain connected
to the polyurethane holding tank, mounted underneath the floor.
|
| Floor
Surface: |
|
Polyurethane sprayed
in continuous liner on the floor in the wash down are continuing
up the wall. Waterproof, oil, grease and chemical resistant.
Liner to be slip-resistant,
wear resistant, scratch resistant. Liner to be resistant to break
down due to UV exposure. |
| Lights: |
|
Two 4'0" twin tube internal
vapor proof florescent lights. |
| Drains: |
|
lines and bal valves
for all waterlines. |
The
Old Way
 |
|
The
Professional Way
 |
Click
Image For Larger View |
Support
Equipment
| Hot
Water: |
|
On demand Takagi, or
equivalent, propane fired, 14000BTU with temperature control setting.
Stainless steel vent mounted on front wall. |
| Water
pressure regulator: |
|
Grinnell or equivalent
|
| Walter
Filer: |
|
Cartridge model or equal
with removable container cleanout. |
| Mixing
valve: |
|
Adjustable to control
water temperature to showers. |
| Water
connection: |
|
Flexible water connection
to external source for standard hose; or fire truck connections.
|
| Generator: |
|
Propane powered portable
4000 watt for standard electrical requirements. |
|
Electrical switched: |
|
control internal lights
and external lights and optional pump. Switch boxes are to be weatherproof.
|
| Propane
tanks: |
|
Two 20# with dual valve
and auto regulator (40# optional). |
| Access
ramp: |
|
30' x 60" x 4" -600lb
load capacity -aluminum folding storable access ramp with anti-skid
surface applied. |
| Transfer
hose: |
|
Industrial grade commercial
duty reinforces hose for transferring contaminated liquid from mobile
unit to disposable storage. Self priming pump for discharge of containment
tank. Electric start generator. |
| Storage
Equipment Bin: |
|
29 Cu-Ft with left
and right double wall galvanized access doors with stainless steel
hinges. |
| Door: |
|
Left and right access
to storage areas. Doors to be double wall galvanized insulate with
a polyurethane core. Aluminum extruded frame securing door in panel
and door edge frame to panel. Latches securing top and bottom and
lock keyed to match. |
| Color: |
|
Trailer frame, fenders,
tongue to be black. Decontamination room; exterior white, interior
metal finish. |
| Lettering: |
|
Optional |
Options:
- 2" Ball
Hitch
- Caster
Wheel
- LED Tail
Lights
|
- Locks for
LP Tanks
- LP Level
Indicators
- Internal
Exhaust Fan
|
- 2 Extra
Drench Hoses
- Dual Hose
Connections (STD & Hydrant)
- Discharge
Pump for Containment Tanks
|
Click
Image For Larger View |
|
 |
Specification
subject to change.
[
Home | About ICS
| ICS Solutions | The
Product | FAQ's | Photo
Gallery | Technical Info
]
[ Contractors | Hazmat Unit | In
The News | Testimonials | Links
| Contact Us ]
|
2225
C. R. 44 West, Eustis, FL 32726
352-483-7477, 352-589-8477 Fax, Email |
|
